Concrete Paver Cleaning and Sealing

We service Sydney, Newcastle, Central Coast, Port Stephens and the greater Hunter regions.

Concrete pavers are relatively soft and most commonly used for outdoor paving, pool surrounds and retaining walls.

Because of its porous nature, concrete pavers are prone to mould and grout haze if not pre-sealed prior to grouting.

Sealing your concrete pavers creates a barrier that provides protection against stains by chemicals, contamination and deterioration.

If you have a salt water pool with concrete paver surrounds it is imperative that you seal with an impregnating sealer with hardening properties that will help solidify the particles in the stone and stop any chance of salt spalling and disintegration of your paver.

If you have a mineral or chlorine pool, a standard impregnating sealer is still recommended for protection against staining.

If you are wondering if it may be time to re-seal then you can easily test how porous your concrete pavers are by placing about 15-20mls or a tablespoon of water on the treated surface and leave for 20 minutes. Then soak up the water with some paper towel or a tissue, pressing hard to soak up any water in the pores of the surface. If the water has absorbed into or leaves a dark mark on the surface, it requires more sealing.

Give us a call today to discuss your concrete paver cleaning, sealing, mould removal or maintenance needs!